Description
Epoxy Sealed Bimetal Thermostat
431 Series
Ideal for Extreme Environments!
Open on Temperature Rise
A polypropylene boot filled with epoxy protects the bimetal disc, contacts, and terminals from water, salt, dust, etc. This model is a direct mount thermostat switch and comes in 12″ or 72″ long #18 AWG leads. Choose your desired length and temperature below. This thermostat switch has a surface mount flange and comes in 12″ or 72″ long #18 AWG leads. Choose your desired length and temperature below.
- Surface Mount
- Variety of wire leads
- Temps from 20°F to 250°F
- Up to 15 Amps @ 120 VAC
- Operates with AC or DC
- 100,000 cycles
- UL Recognized
- Made in the USA
Note: All sealed units take three days to build and cure.
For more information and product specifications, please view our catalog.
If you need a temperature range or configuration not listed here, please contact our office: (715) 831-6353
Andrew Bean (verified owner) –
Overall I’m pleased with this thermal switch. I did notice on the first few cycles that the upper cutout temp was 20-30% higher than rated; however after 5-6 cycles it came into spec range. The only other concern is the mounting plate material is fairly thin; another 5 or 10 thousand thickest would have been appreciated as I needed to drill out the mounting holes just a bit larger to fit on existing studs.
Russell R. (verified owner) –
Fast shipping and the product is just as described