(715) 831-6353 info@senasys.com

Tag: Manual Reset Thermostat Switch Helpful Information

FASTON Terminal Connectors

Snap Disc Quick Connect Vs. Screw Terminals

The type of Snap Disc terminal connection you use will vary from application to application but the wrong type of snap disc terminal could cause a connection to come loose, especially in an application with vibration.  Wikipedia states that “A terminal is the point at which a conductor from a component, device or network comes to an […]

Manual Reset Temperature Switch FAQs

Manual Reset Temperature Switch FAQs

Senasys snap disc temperature switches are available in three functions: automatic, manual and one shot. A manual reset temperature switch is commonly used in an overheat application. For example, if there is an excessive amount of temperature rise, the switch stops the equipment and doesn’t allow the equipment to turn […]

Manual Reset Thermal Switches

Direct Replacement Manual Reset Thermal Switches

As an easy guide for you we have created this simple cross reference guide to help you find the manual reset thermostat switch you need. If you have one of the part numbers listed below, simply match it to our part number. Give us a call for for more information or […]

Bi-Metal Thermostat Lead Times

Senasys Bi-Metal Thermostat Lead Times

Senasys prides ourselves on delivering a quality product, fast to our customers. Many of our competitors are larger corporations causing delays through the supply chain making it difficult to get bi-metal thermostats when you need them. When you work with Senasys not only do you get the answer you need […]

432 Manual Reset Thermostat Switches, Loose Mount

Snap Disc Thermostat Continuity Test

When customer’s contact us about troubleshooting a snap disc thermostat that is found in a piece of their equipment one of the first things we ask the customer is if they tested the snap disc’s continuity. This will tell us if the high limit has been reached, and it’s simple! […]

Bi-metal Snap Disc

1/4″, 1/2″ or 3/4″ Bi-Metal Snap Discs

Bi-metal discs can come in all shapes and sizes. Depending on your specifications and quantity, Senasys can build custom bi-metal snap discs to fit inside a thermostat switch. Our standard snap disc thermostat switches use a 1/2″ or 3/4″ disc. Give us a call for for more information or visit our online […]

Manual Reset Thermostat Switch

Thermodisc Cross Reference Guide

Senasys bi-metal snap disc thermostats can directly replace many other snap disc thermostats such as Thermodisc (T.O.D.). Because of this, we have created a simple Thermodisc cross reference guide to help you find your required manual reset thermostat. View the below table and simply match your Thermodisc part number to […]

Manual Reset Thermostat Switch

Sensata Manual Reset Switch

As an easy guide for you we have created this simple cross reference guide to help you find the manual reset thermostat switch you need. If you have one of the part numbers listed below, simply match it to our part number. Give us a call for for more information or […]

432 Manual Reset Thermostat Switches, Surface Mount

Manual Reset Limit Switch Common Uses

Senasys’ manual reset limit switches are a temperature sensing device with normally closed contacts. The contacts open (limit) at a factory set point. Once that limit is reached, a human must manually press the red reset button for the switch to return back to the normally closed state. Manual reset […]

snap disc thermostats

Selco “OM” and “T” Cross Reference Guide

To make this process easier, we created this simple cross reference guide in order to help you find a cross reference for your Selco temperature switch. If you have one of the part numbers listed in the below table, simply match it to our part number. As always, contact us for […]