The Senasys manual reset thermostat switch is available only with electrical contacts that open as the temperature increases. The contacts may be reset by manually pushing on the reset button after the control has cooled below the open temperature calibration.

A manual reset thermostat switch is a temperature sensing device with normally closed contacts. The contacts open (limit) at a factory set point. Once that limit is reached, a human must manually press the red reset button for the switch to return back to the normally closed state. Manual reset limit switches are commonly found in areas where temperature should not increase and needs to be looked at before returning back to normal before the equipment or appliance can work again.

Click here to learn more about when a manual reset switch should be used or Contact us today for more