Configuring CMC Indicator Units involve setting up various parameters and options to ensure it effectively communicates critical information about motor status and operation. This process allows you to customize the indicator unit’s behavior, such as defining the visual indicators, alarms, and notifications associated with different motor states. By properly configuring the CMC Indicator Unit, you can enhance situational awareness, troubleshoot motor issues efficiently, and improve overall operational efficiency.
All CMC Indicator Units are part number 908AAA–. The last two digits are determined by the number of terminals and the type of lamps (see below). Unlighted units end in 67 for a complete part number of 908AAA67.
Configurations
908AAA–
67 —Unlighted
FOUR TERMINAL UNITS use with 2 lamps
95 —120 VAC transformers (2) and No. 755 lamps in quadrants A & B, nothing in quads C & D
96 —120 VAC transformers (2) and No. 755 lamps in quadrants C & D, nothing in quads A & B
97 —Line voltage jumpers in quadrants A & B, no lamps, nothing in quads C & D. Can be
used with incandescent or LED bulbs.
98 —Line voltage jumpers in quadrants C & D, no lamps, nothing in quads A & B. Can be
used with incandescent or LED bulbs.
38 —120 VAC transformers (2) in quadrants A & B. Quadrants C & D unlighted. For use with 6
volt LED lamps and color inserts.
FIVE TERMINAL UNITS use with 4 lamps
01 —120 VAC transformers (4) and (4) No. 755 lamps
02 —240 VAC transformers (4) and (4) No. 755 lamps
03 —Line voltage jumpers (4)—Less lamps. Can be used with incandescent or LED bulbs.
40 —48 volt resistors (4) and (4) No. 1819 lamps
05 —24 volt resistors (4) and (4) No. 756 lamps
15 —120 VAC transformers (4). For use with 6 volt LED lamps and color inserts.
16 —240 VAC transformers (4). For use with 6 volt LED lamps and color inserts.
EIGHT TERMINAL UNITS use with 4 lamps
51 —120 VAC transformers (4) and (4) No. 755 lamps
52 —240 VAC transformers (4) and (4) No. 755 lamps
53 —Line voltage jumpers (4) less lamps1. Can be used with incandescent or LED bulbs.
90 —48 volt resistors (4) and (4) No. 1819 lamps
50 —24 volt resistors (4) and (4) No. 756 lamps
55 —120 VAC transformers (4). For use with 6 volt LED lamps and color inserts.
56 —240 VAC transformers (4). For use with 6 volt LED lamps and color inserts.
Add the two numbers that match up with the number of terminals and type of lamps you need, and you’ll have a complete part number. If you need to get a quote on your unit, or just need some more information, be sure to contact us.
