(715) 831-6353 info@senasys.com

Coffee Makers Use Snap Disc Thermostats

Did you know that one of our switches could be used to make that cup of coffee you are drinking every morning? Well, now you do. I am going to get you a little insight on how our switches can be used in coffee makers as well as a few tips to coffee maker repair. The size and price of your coffee maker will make a difference on which controls are used.

We know you’re smart but make sure the unit is unplugged and has no power to the coffee maker. The unit should be cooled down before attempting any of this.

For more information about our snap disc thermostats, click here.

If you’re looking to design custom snap disc thermostat, contact us!

More Information about snap disc thermostats. Request snap disc thermostat quote

Technical Information

Most coffee makers have two control systems. The first of the control systems can be fixed temperatures or adjustable in the larger or higher priced units. This may be part of the hot water temperature setting on your machine. This first type of thermostat is a snap disc in less expensive units or a capillary thermostat, however newer units may be using a digital thermostat as its replacement. The second type of control system is the high limit. This high limit is what prevents the coffee maker from burning up when the pot runs out of liquids, or if the heater decides to go crazy. The high limit control is typically a snap disc thermostat or a thermal fuse. If the temperature becomes too high for the unit to withstand, the snap disc or thermal fuse will open the incoming power control circuit and then everything will shut off.

Screenshot taken from this video: https://www.youtube.com/watch?v=0VSEbwqthvU

Testing Information

Testing your coffee maker to see if the high limit has been reached could not be easier. All you need to do is unplug the unit from the incoming power, remove the wires from the thermostat and then run a continuity test across the terminals on the high limit. If you notice that you do not get a light, that indicates that the circuit is open which indicates that the high limit has been set off. Most coffee makers have a one-shot snap disc thermostat and once the high limit is hit it will need to be replaced. However, with a higher priced unit you might have a snap disc thermostat that is a manual reset, just push the reset button and your back to your coffee.

Replacement Information

Replacing the snap disc thermostats or thermal fuse in your coffee maker will not bust the bank either. You can find these components run under $20 a unit. However, if your capillary thermostat is going to be on the more expensive side, they can run as high as $70 per unit. The hardest part about fixing your coffee maker is determining what temperatures the thermostats operate at, but after that they are easy to find and easy to replace.

For more tips and tricks on how to repair for coffee maker click here for a step by step break down, OR click here for a video from a Whole Latte Love explaining the process.

Senasys makes both the capillary type thermostats and snap disc thermostats. If you have any questions about your capillary or snap disc thermostat contact us!

Leave a Reply

Your email address will not be published. Required fields are marked *

12 − 4 =