(715) 831-6353 info@senasys.com

Author:

How to Determine the Part Number for your CMC Switch

CMC Micro-Switch CMC multi light controls are ideal for panel mount control systems. The four quadrant feedback lights and multi-position selector units provide the same functionality as a number of simpler switches but require much less panel space. The operating flexibility allows complex circuits to be setup with one switch […]

Replacing a PTY Switch

Out PTY Push-Pull switches can be found in a variety of industrial settings. However, we are not able to provide a direct replacement to some variations of the PTY switch due to the fact that some variations use a transformer that we no longer have in stock. We do still […]

431 Epoxy Sealed Thermal Switch Direct Mount

Snap Disc Freeze Protection Thermostats & Suds

A common application use for Senasys snap disc thermostats is freeze protection. We received a new application from a car wash company, who need a way to insure their equipment doesn’t freeze. They need to make sure the temperature is high enough in the bill boxes and automated cashier to […]

panel mount temperature control

Panel Mount Temperature Control in Production Line

During the research and development phase for the digital temperature switch, we had a new application brought to us which allowed Senasys to pair a thermocouple with the temperature controller rather than our standard RTD sensor. A production line uses a hot brander to stamp cover plates (figure 1). As […]

Temperature Controller Non-Isolated Switching Regulator

Temperature Controller Power Options

During the research and development phase of the digital temperature controller, we determined 120VAC to 5VDC power supply or wire leads for incoming 5VDC power from the user’s system would be required. As we have worked with more applications, we have made a third power option available – 7 to […]

Digital Temperature Controller How To

Digital Temperature Controller How To

The newest addition to our line of switching and sensing products is our Digital Temperature Controller, which can be used to monitor and switch temperature in your system. It would work great to determine what Fixed Temperature or Adjustable Temperature thermostat switch would work best within your application. For more […]

JMP Plunger

Different JMP Actuators Explained

There Are So Many Actuators, Which One Should I Choose? Our JMP line has many different types of actuators, and today we are going to explain each and their functionality. We have five main actuators that are used on our JMP switches. We have the float, leaf, plunger, sail, and […]

Coffee Maker Using Snap Disc

Coffee Makers Use Snap Disc Thermostats

Did you know that one of our switches could be used to make that cup of coffee you are drinking every morning? Well, now you do. I am going to get you a little insight on how our switches can be used in coffee makers as well as a few […]

Digital Temperature Sensor

Digital Temperature Sensor Relay Testing

During the research phase of the digital temperature sensor, we determined the industry standard for digital switching solutions was 10 Amps at 120VAC. With our experience with mechanical temperature switches we set the bar for a minimum of 100,000 cycles. To see our cycle test findings continue reading below. For […]

15 Amp Auto Reset Thermostat Switches

Snap Disc Thermostat Temperature Tests

Snap Disc Thermostat Temperature Testing Snap disc thermostat testing is something we take very seriously here at Senasys. There are multiple different tests that we preform to maintain the highest quality possible for our snap disc product line. Give us a call for for more information or visit our online store to purchase. […]